Hf Ab Crystal Drop Glue Hand Painted Adhesive Liquid Crystal Transparent Epoxy Resin Wood Adhesive

• CAS No.: 25068-38-6
• Formula: C15h16o2c2h7onc3h5ocl
• EINECS: 231-072-3
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HF402-88
• Application: Construction, Woodworking
• Material: Epoxy
• Classification: Room Curing
• Main Agent Composition: Natural Polymer
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Clear
• Type: Double Components Adhesives
• Mixing Ratio: 2:1
• Certificate: RoHS,Reach, PAHs, ASTM
• Life Time: Anti-Yellow at 5yrs+
• Grade: Food Grade Resin
• Voc: Low Voc Low Odor
• Ripple: No Ripple
• Leveling: Self-Leveling and Extremely Durable
• UV: UV Resistant
• Solids: 100% Solids
• Transport Package: Barrel/ Carton/ Wooden Box
• Specification: 1KG/5KG/20KG/50KG/ 200KG
• Trademark: HF
• Origin: Guangdong
• HS Code: 3506912000
• Production Capacity: 5000000 Tons/Year

Product Description

2:1 Clear Epoxy Resin for Deep Casting

Product Parameters

 

Item (HF402)	Epoxy Resin(A )	Epoxy Hardener (B )
Color	Transparent Liquid	Transparent Liquid
Viscosity@25ºC(mpa.s)	2000-4000 CPS	50 MAXCPS
Specific Gravity	1.15	0.97
Mix Ratio(by weight)	2	1
Hardness(Shored)	85 D
Operation time(100g mixed glue ,25ºC)	300 Minutes
Curing Time(25ºC)	48-72 Hours
Shelf Life	12 Months

Feature
Epoxy resin HF402 can be cured under normal temperature and elevated temperature, with good flowing property, natural defoaming, high hardness, no ripple, bright in surface.

* No Toxic Organic Compounds or Heavy Metals

* 100% Solids, Low VOC, Low odor,UV resistant

* Self-Leveling and Extremely Durable

* Crystal Clear, High Gloss and Excellent Color Stability

*Not whitish, no bubbles

*Anti-yellow for at least five years

*Food grade FDA approved resin
 

Detailed Photos

 

Packaging & Shipping

 

Our Advantages

 

 

 

FAQ

 

How to use

Step 1: The ideal working temperature is around a constant 77°F. Best results can be obtained at constant temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. We recommend using this product on a leveled and flat work surface.

 

Step 2: Measure product in accordance with your intended use. Prepare 2 parts Base Resin to 1 part Curing Agent by liquid volume.Pour the Curing Agent first and then the Base Resin into a clean, smooth-sided container large enough to hold all the liquid and allow room for mixing.

 

Step 3: The material must be mixed thoroughly for at least 3 minutes. Be sure to scrape the container sides, bottom, and corners as you mix. Be careful not to whip excessive air into the mixture. If mixing a gallon, use a power mixer set to "hand speed." For smaller quantities, use stir sticks. Do not mix more than a gallon. Pour into a new, clean container and mix for an additional minute.

 

Step 4: Pour the mixed resin onto the surface and distribute evenly with a squeegee or gloved hand. Continue to pour remaining material to achieve the desired thickness, allowing the resin to flow evenly over the project's sides. Resin can be poured up to 1/4" thick per pour.

 

Step 5: Use a heat source such as a heat gun to remove any bubbles by adding a small amount of heat to the surrounding area. The bubble will rise to the surface and pop.

 

Step 6: If you are going to make a second pour, the first pour should still be slightly sticky. Once the second pour is made, bubbles may once again need to be removed. Material will feel hard after 45-60 minutes, cure to the point of workability within 24 hours, but full cure and maximum hardness can require up to 7 days, depending upon the temperature.